Plan better air-conditioning positions by considering airflow, sound, pipe routes, condensate, neighbours, appearance and service access.
Indoor units need clear airflow
A high-wall unit draws room air through the top and supplies conditioned air from the front. Avoid tight shelves, deep beams, curtains and tall furniture that block either path. The air should travel into the room rather than striking a nearby wall.
Avoid direct airflow onto people
Do not aim the primary air stream directly at a bed, sofa or fixed desk where someone remains for long periods. Louvre control helps, but the basic position should work before relying on software settings.
Allow for drainage
Cooling creates condensate. A gravity drain is simple and quiet when a suitable fall is available. A condensate pump can solve difficult routes but adds a component that requires access and may produce sound. The route should be agreed in advance.
Outdoor units need air and service space
The condenser must reject heat without recirculating its discharge air. It needs manufacturer clearances, stable support and access for maintenance. Enclosed alleys, cramped balconies and locations surrounded by stored items may be unsuitable.
Consider neighbours and bedrooms
Review the outdoor sound data and the proposed position relative to windows, boundaries and quiet outdoor spaces. Anti-vibration mounting and correct installation are important, but sensible location is the first control.
Protect the appearance of the property
Agree pipe containment, colour, bends, drainage termination and cable routes. A slightly longer but carefully planned route can be worthwhile if it significantly improves the appearance—provided it remains within the equipment design limits.
Think about future access
Filters, coils, pumps, isolators and flare connections need inspection or maintenance. Do not place equipment where routine servicing would require dismantling fitted furniture or unsafe access.
Want positions agreed before installation day?
Our survey covers equipment, airflow, drainage, routes, sound and future servicing.
Book a site survey →Before you request a quotation
Collect the room dimensions, note when the space overheats, take photos of possible indoor and outdoor positions and confirm whether the property is freehold or leasehold. This gives the designer a useful starting point, but it does not replace a heat-load assessment or site survey.