Design air conditioning for conservatories and glazed extensions by accounting for solar gain, roof type, open-plan layouts, airflow, shading and heating needs.
Glass changes the heat load
A simple floor-area estimate is especially unreliable in a conservatory or extension. The survey should consider glazing area and specification, roof construction, orientation, shading, openings and whether the space connects directly to the original house.
Open-plan rooms need airflow planning
Where an extension opens into a kitchen or living room, the system needs to serve the occupied zone without directing a strong stream at the dining table or sofa. High-level heat and the position of rooflights also influence circulation.
Shading reduces peak demand
Blinds, external shading and solar-control glazing can reduce heat gain and improve comfort. Air conditioning should complement these measures rather than compensate for every avoidable source of heat.
Heating mode can extend use
A reversible split system can provide fast warm air during cooler periods. It may make the room more usable without heating the entire property, but the system must still be sized for the space and outdoor conditions.
Find a practical indoor position
Large doors and windows can leave little solid wall area. The designer may consider a high-wall, low-wall or concealed option depending on structure, appearance and budget. Condensate drainage and the outdoor route should be resolved before the unit style is finalised.
Control connected spaces sensibly
If the extension and original room operate as one space, placing a small unit only in the extension may not distribute air evenly. Door positions, openings and room proportions need to be assessed as one comfort zone.
Is your extension unusable in hot weather?
We assess glazing, layout and airflow before designing the system.
Arrange an extension survey →Before you request a quotation
Collect the room dimensions, note when the space overheats, take photos of possible indoor and outdoor positions and confirm whether the property is freehold or leasehold. This gives the designer a useful starting point, but it does not replace a heat-load assessment or site survey.